 EASY BRACKETS-QUICK DETACH BRACKETSAll Softails, including Fatboy.
Fits on the following: FLSTC/FLSTCI Heritage Softail Classic; FLSTS/FLSTSI Heritage Springer; FXSTB/FXSTBI Night Train; FXSTS/FXSTSI Spring Softail; FXST/ FXSTI Softail Standard; FLSTF / FLSTFI Fat Boy, Heritage Nostalgia & Heritage Special and all other Softails not otherwise listed. For Deuce, see its separate listing below.
If you have a Heritage Softail, do not use these brackets with Harley Davidson brand saddlebags, instead use the HRT Series brackets listed below.
ST-R1 Attaches to the front two existing bolt holes in the fender rail. (If you have a backrest see kits ST-R1HB and ST-R1DB) Fits all model years.
ST-R1HB Attaches to the front two existing bolt holes in the fender rail. For use with Hard Mount Backrest. Fits all model years.
ST-R1DB Attaches to the front two existing bolt holes in the fender rail. For use with Detachable Backrest. Fits all model years.
ST-L1 Recommended for larger saddlebags (up to 21" wide). It uses the same docking points as the detachable backrest. Turn signals must be relocated off the fender rail to tail light area.
ST-L1DB Recommended for larger saddlebags (up to 21" wide). Turn signals must be relocated off the fender rail to tail light area. For use with Detachable Backrest.
Heritage Softails
For use with Heritage Softails that are using existing Harley Davidson Heritage saddlebags only. Will not work with stock Heritage Springer saddlebags.
HRT-R1 Fits all Heritage Softails 1999 and older. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system.
HRT-R1DB Fits all Heritage Softails 1999 and older. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system. For use with motorcycles w/ Detachable Backrest.
HRT-R2 Fits Heritage Softails 2000 through 2002. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system.
HRT-R2DB Fits Heritage Softails 2000 through 2002. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system. For use with motorcycles w/ Detachable Backrest.
HRT-R3 Fits 2003 and later Heritage Softails. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system.
HRT-R3DB Fits 2003 and later Heritage Softails. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system. For use with motorcycles w/ Detachable Backrest.
FLH / Shovelhead
VC-R1 Fits FLHs with a fender nut spread of 7 1/4", center to center.
FXR
FXR-R1 Fits FXR Models 1990 to present. Used with small to medium saddlebags (12" to 14" wide). Attaches to the front hole in the fender rail and turn signal hole after turn signal is relocated off fender rail.
All Dynas
For HD Dyna FXDWG 1990 to present and HD Dyna FXD, FXDL or FXDX 1996 to present.
DNA-R1 Attaches to the front existing bolt hole and the turn signal hole. Turn signal must be relocated to rear hole. Must have minimum 2" clear between turn signal and Easy Bracket rear mounting point. (If you have a detachable backrest, see kit DNA-L1)
DNA-R1HB For Dynas with Hard mount backrest only. If you have a detachable backrest, see kit DNA-L1. Attaches to the front existing bolt hole and the turn signal hole. Turn signal must be relocated to rear hole. Must have minimum 2" clear between turn signal and Easy Bracket rear mounting point.
DNA-L1 For use with detachable backrest; uses same docking points as detachable backrest (bolt holes 10 3/8" center to center). Turn signal must be relocated off fender rail to tail light area.
Sportsters & Huggers
SPT-R1 Fits 1994 through 2003 Sportsters including XLH 883 Hugger, XL 883R, XLH 883, SL 883C Custom, XL 1200C Custom, XLH 1200 & XLH 883 Custom (will not work on XL1200S). Attaches to the front hole in fender rail and turn signal hole after turn signal is relocated off the fender rail to tail light area.
SPT-R1DB Fits 1994 through 2003 Sportsters including XLH 883 Hugger, XL 883R, XLH 883, SL 883C Custom, XL 1200C Custom, XLH 1200 & XLH 883 Custom (will not work on XL1200S) with detachable backrest. Attaches to the front hole in fender rail and turn signal hole after turn signal is relocated off the fender rail to tail light area.
SPT-R2 Fits 2004 later Sportsters including XLH 883 Hugger, XL 883R, XLH 883, SL 883C Custom, XL 1200C Custom, XLH 1200 & XLH 883 Custom (will not work on XL1200S). Attaches to the front hole in fender rail and turn signal hole after turn signal is relocated off the fender rail to tail light area.
Deuce
DUC-R1 For use will all Duece models. Turn signals remain in factory location. Must be used with a mounting kit, manufactured and sold separately by Great Bike Gear (Easy Bracket Dealers will also carry this kit). For more details and pictures, please see the Great Bike Gear website.
Honda Motorcycles
Honda Ace 750
ACE-R1 Attaches to the two (2) existing bolt holes in the fender rail.
Honda Aero 750
ARO-R2 Fits Honda Shadow Aero 750's
Honda Aero 1100
ARO-R1 Fits Honda Shadow Aero 1100's
Honda Magna
MGA-R1 Attaches to the two (2) existing bolt holes in the fender rail.
Honda Sabre
SABR-R1 Fits Honda Sabre.
Honda Valkyrie
VKE-R1 Fits Honda Valkyrie
Honda VTX 1800 & 1300 Classic & VTX 1800 & 1300 Retro
VTX-C1 Fits Honda VTX 1800 Classic only. Attaches to the two (2) rear existing bolt holes in the fender rail. If you have a Hondaline Backrest, please use kit VTX-C1BR.
VTX-C1BR Fits Honda VTX 1800 Classic w/ Hondaline Deluxe Backrest. Will not work with other Backrest Models. A special plate allows you to mount the docking posts right to the backrest, keeping everything close to the motorcycle.
VTX-R2 Fits Honda VTX 1800 Retro and 1300 Retro. Attaches to the two (2) rear existing bolt holes in the fender rail. If you have a Hondaline Backrest, please use kit VTX-R2BR.
VTX-R2BR Fits Honda VTX 1800 Retro and 1300 Retro w/ Hondaline Deluxe Backrest. Will not work with other Backrest Models. Attaches to the two (2) rear existing bolt holes in the fender rail.
Kawasaki Motorcycles
Kawasaki Vulcan 800
V800-R1 Fits Kawasaki Vulcan 800. Attaches to the two (2) existing bolt holes on the fender rail. (Will not fit on Drifter.)
Kawasaki Vulcan Classic 1500
VC-R1 Will fit on Kawasaki Vulcan Classic 1500. Attaches to the two (2) existing bolt holes on the fender rail.
Kawasaki Vulcan Classic 1600
VC-R2 Will fit on Kawasaki Vulcan Classic 1600. Attaches to the two (2) existing bolt holes on the fender rail.
Kawasaki Vulcan 2000
VC-R3 Fits Kawasaki Vulcan 2000.
Suzuki Motorcycles
Suzuki Volusia 800
VOL-R1 Fits Suzuki Volusia 800 only. Attaches to the two (2) existing bolt holes in the fender rail. If you have a hard mount back rest, order kit VOL-R1BR instead.
VOL-R1BR Fits Suzuki Volusia 800 only. Attaches to the two (2) existing bolt holes in the fender rail. For use with hard mount back rest.
Suzuki Intruder 1500
SI-R1 Fits Suzuki Intruder 1500 only. Attaches to the two (2) existing bolt holes in the fender rail. If you have a helmet lock on the fender, the lock must be removed in order to use the brackets.
Yamaha Motorcycles
Yamaha Royal Star & Road Star
YMA-R2 Fits all years & all models of Yamaha Royal Star and/or Yamaha Road Star. (For Warrior, use kit WAR-R1). Attaches to the two (2) existing bolt holes in the fender rail. If you have a backrest, use kit YMA-R2BR.
YMA-R2BR Fits all years & all models of Yamaha Royal Star and/or Yamaha Road Star with backrest. (For Yamaha Warrior, use kit WAR-R1). Attaches to the two (2) existing bolt holes in the fender rail.
WAR-R1 Fits Yamaha Road Star Warrior. Stock exhaust should be replaced on this motorcycle to provide adequate clearance for standard sized saddlebags.
Yamaha V-Star 1100 Classic & 1100 Custom
YMA-R1 Fits Yamaha V-Star 1100 Classic & Custom (not for 650's). Attaches to the two (2) existing bolt holes in the fender rail. If you have a backrest, use kit YMA-R1BR
YMA-R1BR Fits V-Star 1100 Classic & Custom (not for 650's) with backrests. Attaches to the two (2) existing bolt holes in the fender rail.
Yamaha V-Star 650 Classic & Custom
Y650-CL Fits Yamaha V-Star 650 Classic (not for 1100 Classic). Turn signal may have to be relocated depending on the size of saddlebag used.
Y650-CS Fits Yamaha V-Star 650 Custom (not for 1100 Classic). Turn signal may have to be relocated depending on the size of saddlebag used.
Yamaha Virago
.
Retail Price: $159.99
Our Price: $149.99
|
Rates